Product Range - Telemechanique OsiSense XM
Pressure sensor type - Electromechanical pressure sensor
Pressure sensor name - XMP
Pressure sensor size - 6 bar
Fluid connection type - G 1/4 (female) conforming to ISO 228
Controlled fluid - Sea water (0...70 °C)
Fresh water (0...70 °C)
Air (0...70 °C)
Cable entry - 2 entries tapped for Pg 13.5 cable gland conforming to NF C 68-300
Contacts type and composition- 2 NC snap action
Pressure switch type of operation - Regulation between 2 thresholds
Electrical connection - Screw-clamp terminals, clamping capacity: minimum: 2 x 4 mm²
Electrical circuit type - Power circuit
Scale type - Adjustable differential
Adjustable range of switching point on falling pressure - 0.2...4.8 bar
Adjustment range high setting - 1...6 bar
Possible differential minimum at low setting - 0.8 bar
Possible differential minimum at high setting - 1.2 bar
Possible differential maximum at high setting - 4.2 bar
Destruction pressure - 30 bar
Terminal block type - 4 terminals
Pressure actuator - Diaphragm
Materials in contact with fluid - Canvas covered nitrile Chromated zinc alloy
Enclosure material - PA impregnated with fibreglass
Operating position - Any position
Operating rate - 10 cyc/mn
Repeat accuracy - < 3.5 %
Mechanical durability - 1000000 cycles
Setting - Nut
Product weight - 0.43 kg
Terminals description ISO n°1 - (1-2)NC
(3-4)NC
Depth - 98 mm
Height - 106 mm
Width - 57 mm
IP degree of protection - IP54 conforming to EN/IEC 60529